sunflower oil processing plant with CE

Best quality equipment Coconut Oil Plant Equipment:
Suitable material:peanut, soybean, rapeseed, sunflower seed and such oil material.

processing process of sunflower oil processing plant with CE:
1.Cleaning of sunflower oil processing plant with CE:
In order to obtain high effective cleaning, ensure good work condition and production stability, high efficient vibration screen was used in the process to separate big and small impurity.
Suction type gravity stoner removing machine was applied to remove the shoulder stone and earth, and magnetic separation equipment without power and exhaust system were used to remove iron.Dust removing wind net is installed. soybean oil machine

2. Flaking of sunflower oil processing plant with CE:
Flaking means a certainty granularity of soy lamella was prepared for flaked of about 0.3 mm, the oil of raw material can be
extracted in the shortest time and maximum, and residual oil was less than 1%.

3. Cooking of sunflower oil processing plant with CE:
This process is heating and cooking for rapeseed which is easy to separate of oil and can provide the oil quantity from pre-press machine.It is easy to operate and have long life. soybean oil machine

4. Oil press machine of sunflower oil processing plant with CE:
soybean oil extraction machinery's oil extraction is continuous screw press machine which is suitable to
the plant oil materials which has high oil content. oil extraction plant.The instruction of the cake is loose and easy to make the solvent permeate ,the oil content of cake and moisture used for solvent extraction.

5. Crude oil refining of sunflower oil processing plant with CE:
Oil refining is according to the different usage and requirements, utilizing the physical methods and chemical processes to get rid of the harmful impurities and needless substance in the crude oil, getting standard oil.

sunflower oil processing plant with CE

Our Strength
1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in
global grain and oil industry.

2, We have deep cooperation with Jinan Machine Design Research Institute and Jinan
University of Technology. Our professor often go abroad attending grain and oil conference and forum.
3, We have completed service line including technical department, engineering department,
project department, electronic commerce department, domestic trade department and foreign trade department.
After signing contract, we will set up special team including engineers, installation technicians, drawing
designer, business person, after-sales service person, and so on. We will provide one-to-one service.

Our Service
Whole set of equipment for production line.
Motor and power control system.
Installation material.
Installation and test-run.
Drawing of process description, equipment layout, foundation and
hole, construction.
Drawing of power control.
Isolation and painting for equipment.
Water recycling and cooling system outside the plant (i.e. supplementary device).
Staff training and long-term technical service.

Main Business Field
1, 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
2, 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot
dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake
extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
3, 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop
type extractor,
4, DTDC separated machine, the full negative pressure evaporation,
5, Paraffin wax recovery, leaching workshop degumming, phospholipid concentration.
6, 30-1000T/D continuous physical (chemical) refining line.
7, 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
8, 10-200T/D fatty acid esterification edible ol production line.


Available Oil Raw Materials:

I Pretreatment Plant Introduction:

1.Different combinations of process can process various oil plants in one workshop.

2. Use special intensified pretreatment technology for aroma peanut oil to make it more aroma.

3. Adopt advanced and reliable shelling technology to meet higher requirements for protein content in meal.

4. Extrusion treatment is used for raw materials with hard extraction, large-sized powder, and large capacity, which can reduce residual oil and solvent consumption, and increase the capacity by 50-80%.

5.The new technology of shelling and low-temperature treatment can ensure high protein and least denaturation.

II Extraction Plant Introduction:

1) The material is divided into several independent units on the material bed, which can effectively prevent miscella at all levels from fleeing hither and thither on the material layer and ensure the concentration gradient between several sprays.

2) Immersion area appears in each lattice, which can help achieve better immersion effect.

3) The chain box is supported by track and can prolong the service life of screen deck by not touching it.

4) The towline extractor is driven by world leading double-shaft hydraulic motor, with balance force, reliable operation and less maintenance cost.

5) Specialty suitable for the extraction of high oil and high power materials, and better immersion effect can be expected for ordinary oil plants.

IIIRefining Equipment Introduction:

Basing on the traditional oil refining technology, Shandong LD Grain & Oil Machinery Co., Ltd has developed the latest combined packing layer plate deodorization soft tower and the physical and chemical mixed refining technology for crude oil of any quality. Moreover, a series of advanced technology and equipment are used, such as super wet deguming, bleaching earth automatic metering, negative pressure decoloring, high vacuum steam jet deodorization, deacidification, winterization dewaxing etc. With advanced technology, superior equipment, full-automatic control and excellent economic and technical parameters, our equipment can meet customers' different refining requirements at home and abroad.

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of sunflower oil processing plant with CE.Shandong Leader Machinery Co.,Ltd. manufacture sunflower oil processing plant with CE making machine using cutting-edge technology,Shandong Leader Machinery Co.,Ltd. have many kinds of Coconut Oil Plant Equipment for you reference,such as sunflower oil processing plant with CE,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Coconut Oil Plant Equipment.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for sunflower oil processing plant with CE, inform us raw material you want to use for sunflower oil processing plant with CE,and specific requirements for sunflower oil processing plant with CE.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Coconut Oil Plant Equipment.