100-500 TPD crude oil refinery machine supplier

Compose of impurities in the crude oil of 100-500 TPD crude oil refinery machine supplier:
Mechanical Impurities of 100-500 TPD crude oil refinery machine supplier:This impurities will not dissolve in the oil and fat .They are main silt, meal ,fiber ,grass and other solid impurities.
Fat soluble impurities of 100-500 TPD crude oil refinery machine supplier :free fatty acid , pigment , tocopherol,Hydro carbons ,Wax , Ketone , and trace metal etc
The process of 100-500 TPD crude oil refinery machine supplier:
1.Decolour tank is for bleaching grease.
2.Deodorizing tank is for desdorizing grease(stainless steel).
3.Conducting oil furnace provide thermal enery need for production, the temperature reach to 280degree.
4.Vacuum pump provides vacuum for bleaching, deodorization which can reach 755mmHg or more;
5.Air compreassor can dry the bleached clay
6.Air press is for filter clay
7.Steam generator can generate steam distillation required.
8.This kind of oil refining eqiupment make the oi reach the standard level national edible oil.

The oil grade after refinery of 100-500 TPD crude oil refinery machine supplier:
One grade oil of 100-500 TPD crude oil refinery machine supplier; after Degumming to Dewaxing No smell, Good taste
Two grade oil of 100-500 TPD crude oil refinery machine supplier; after Degumming to Deodorization No smell, Good taste
Three grade oil of 100-500 TPD crude oil refinery machine supplier; after Degumming ,Deacidification Four grade oil of 100-500 TPD crude oil refinery machine supplier; after Degumming, Has the inherent sunflower oil taste and smell, no odor.

100-500 TPD crude oil refinery machine supplier

About us

Our company is a manufacturer of all kinds of oil production line equipment. Established in 1978. We have a big plant and rich experience in this field. We have exported our equipments to many countries like Egypt, Chile, Argentina, Ethiopia, Zambia, Nigeria, Russia and Turkey etc.

1.Soybean pretreatment flow chart:

Soybean→Materials dosing →Magnetic separation→Cleaning→crusher→flaker→ Extrusion Puffing →Counter-current drying→To leaching plant

Main process description:

Extrusion section

Process feature:

Pretreatment process feature:

1) Different combinations of process can process various oil plants in one workshop.

2) Use special intensified pretreatment technology for aroma peanut oil to make it more aroma.

3) Adopt advanced and reliable shelling technology to meet higher requirements for protein content in meal.

4) Extrusion treatment is used for raw materials with hard extraction, large-sized powder, and large capacity, which can reduce residual oil and solvent consumption, and increase the capacity by 50-80%.

5) The new technology of shelling and low-temperature treatment can ensure high protein and least denaturation.

Economic and technical parameters

Steam consumption:Soybean≤90kg/t Materials(Soybean moisture12%,Temperature:20°C)

Power consumption:365.95KW(Installed power)

Soybean extrusion cake quality:

Moisture ≤10%

Temperature 55°C~60°C

Oil content 19-24%

2.Extraction flow chart

Material embryos→Extraction→Wet meal→Evaporation→Cooling→Product meal packing

↓

Mixed oil→Filter→Negative pressure evaporation → Crude oil

↓

Solvent recovery

Negative pressure evaporation advantages:

• Vacuum evaporation features high efficiency, thorough de-solvation and low solvent consumption in crude oil.

• Use the second steam of desolventizer toaster and remaining steam from steam jet pump as the heat source of the first steam, which can save energy, reduce the condenser configuration area and save investment.

• Due to the low temperature of the steam, the crude oil features light color, good quality and low residual solvent.

Main economic and technical parameters:

3.Refining

Continuous Oil Refining Process Introduction

Alkali hot water

Crude oil→filter→mix→reactor→mix→reactor→centrifugal separation→oil residue

↑ ↓

Phosphoric acid hot water→mix ↓

↓ ↓

degumming oil←cooler←dry←centrifuge separation←mix←alkali liquor

↓ ↓

↓ vacuum steam jet pump← steam citric acid

↓ ↓ ↓

↓ ↓ ↓

bleaching earth→mix→decoloring→filter→decoloring oil→ mix→ heat

↓

refined oil←filter←cool←deodorizing←vacuum

Part of Deodorization Tower

Process characteristics of 3T/D edible oil refining equipment.

Process description:

The whole process of intermittent refining:

Oil inlet→heating up→deacidification→dealkalizing→washing 2-3 times→dry dehydration. The total time is about 24 hours.

According to the difference of alkali thickness and oil temperature, the process of dealkalizing is divided into two types, one is low temperature with thick alkali (its initial temperature is 20 ~ 30 ℃, alkali thickness is 20 ~ 30 Be) and another one is high temperature with light alkali (its initial temperature is 75 ℃, alkali thickness is 10 to 16 Be). The former is generally applied and the latter is mainly used for crude oil which has low acid value, light clour and lustre, and less impurity.

I. Low temperature with thick alkali:

Adjust the oil temperature to 20~30℃, then put in 20~30Be alkali liquor in 5~10 minutes, and stir it about 20~60 minutes on condition of 60r/m. Increasing the temperature slowly when notice the separate of neatsoap after reacted, 1℃ per minute, when it reach 60℃, stop stiring, keep still and make soap feet settlement, it will takes nearly 6~8 hours, then let out the soapstock.

Ⅱ. High temperature light alkali operation:

Firstly,determine the alkali thickness in accordance with the alkali value of crude oil(according to the table below), account the alkali and water added in, when the alkali value is under 5, for each unit acid value, the total water added into per ton oil is 23 kg. When the alkali value is over 5, no more than 12% of the oil heavy, the exceeded alkali is only 0.005~0.002%.

When operating, first mix the crude oil, heat the temperature to be 70 ~ 75 ℃ diluted saline or phosphoric acid (concentration 90%) , when particles appear, add alkali, then continue to stir for 40 ~ 50 minutes and heat up to be 90 ~ 95 ℃ until soap grain obviously separated, and put into nigre after 2 ~ 3 hours' static.

Ⅲ. Washing:

After releasing the nigre, grease heated up to boom 90℃, then add in the hot water for washing, stirring. Water temperature should be about 5 ~ 10 ℃ higher than the oil temperature, for low water temperature tends to emulsification. After adding the water, continue to stir for 5 minutes, then rest 4 hours for precipitation, and release the soap water, wash 2 ~ 3 times depending on the oil quality and decide. Washed oil slowly heated up to 105℃, stirred dehydration for 1 hour, washed oil can also direct inhaled decoloring pot and vacuum drying 30 minutes.

Method of operate for descoloring

Start the vacuum pump,vacuum degree ≥700mmHg

First, after washing of alkali refining inhaled decoloring pot, stirring, at the same time warming up to 90 ℃, and stir another 30 minutes, decrease moisture below 0.1%, then inhale a few decoloring agents "white earth, activated carbon >, the quantity depends on the oil color, generally, oil amount 2 ~ 4%, stirring 30 minutes, cooled to 70 ℃, use compressed air pressure to filter oil machines to separate the white earth and oil, then get decoloring oil.

Method of operate for deodorizating

l By vacuum pump oil bleaching inhaled deodorization pot, up to 755 mmHg in vacuum degree , begin distillation and deodorization timing;

l Deodorizating time : 4 Hours

l Deodorization temperature: 240℃/755mmHg~260℃/759mmHg

l Deodorization vacuum degree: above 755mmHg

l There is steam distillation during the whole timing process.

l After deodorization, shut off the direct steam in vacuum condition , close conduction oil,open the valve for cooling water.,until the oil temperature nearly 40~80 ℃,shut off the vacuum pump valve,make test of the oil sample,if it is passed inspection,packing and finish all the manufacturing of edible oil.

Characteristics

l Both short mixed and long mixed process are adapted in washing sector, which ensures washing effectiveness.

l Equipped with vertical leaf filter to remove used bentonite from the oil, operating conveniently and continuously, low laboring tense, keeps environment well, keeps oil residence in deposable bleaching earth in low level.

l Due to accurate stirring method, decreased the maximum distance between the oil of cooling facet so as to ensure the same temperature of crystal with same quality. Better guaranteed that in the process of crystallization, crystal will not cluster in a intense area.

l Flexible system, cooling curve can be easily altered by changing water temperature, thus the kinds of products can be changed easily.

The main economic technical parameters:

we hope to establish a growing, healthy and mutually beneficial trade relationship with you!

If you are interested in our machine, Please click "SEND" to contact with us, or email me by above information.

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of 100-500 TPD crude oil refinery machine supplier.Shandong Leader Machinery Co.,Ltd. manufacture 100-500 TPD crude oil refinery machine supplier making machine using cutting-edge technology,Shandong Leader Machinery Co.,Ltd. have many kinds of Solvent Extraction Plant for you reference,such as 100-500 TPD crude oil refinery machine supplier,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Solvent Extraction Plant.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for 100-500 TPD crude oil refinery machine supplier, inform us raw material you want to use for 100-500 TPD crude oil refinery machine supplier,and specific requirements for 100-500 TPD crude oil refinery machine supplier.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Solvent Extraction Plant.

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of 100-500 TPD crude oil refinery machine supplier.Shandong Leader Machinery Co.,Ltd. manufacture 100-500 TPD crude oil refinery machine supplier making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Solvent Extraction Plant for you reference,such as 100-500 TPD crude oil refinery machine supplier ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Solvent Extraction Plant.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for 100-500 TPD crude oil refinery machine supplier, inform us raw material you want to use for 100-500 TPD crude oil refinery machine supplier,and specific requirements for 100-500 TPD crude oil refinery machine supplier.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Solvent Extraction Plant.