Malaysia market industrial and drinking water treatment chemicals PAC polyaluminum chloride

1.Product appearance: The solid product is produced by the spray drying technology and the obtained product is light yellow, Corresponding liquid products is light yellow.

2.Raw materials:Domestic high-quality aluminium hydroxide,High-quality calcium aluminate,High-quality hydrochloric acid.

3.Usage: Drinking water treatment Treatment of high-purity water

4.Product advantages:

1). Flocculation ability, high adsorption activity, floc formation and deposition of fast.

2). Without alkali and other additives, PH broad in scope, ease of use; for low-temperature, low turbidity, low alkalinity of the raw water is also good flocculation
3).easily to use and good effective.

5.Storage: The products shall be sealed and stored in the dry and ventilated place to prevent from rain ,high temperature and strong sunlight .

6.Application method:
1)The liquid product can be used directly or used after dilution.
Dilution is necessary before used for the solid product. The normal dilution ratio for the solid product is 5%-15%.
2)he specific dosage is based on the flocculation tests and trials by the users. The usual dosage of the liquid product is 3-40 g/ton, and of the solid product, 1-15 g/ton.